• FREE delivery from 100€



    Solvent-free universal crystalline epoxy resin, for transparent and air bubble-free casting.

    Low viscosity, very low odour, self-leveling, natural bubble ventilation and heat resistance up to +65°C. Suitable for pouring up to 10mm layer thickness.

    Product code: - Categories: ,


    Ideal for moulds, paint and surface coating, handicrafts, encapsulation of electrical circuits, floor moulding, concrete, wood varnishing, fibreglass work.

    Quantities to be delivered:

    • 0,725kg - resin 0,5kg + hardener 0,225kg
    • 1,45kg - resin 1kg + hardener 0,45kg
    • 2,9kg - resin 2kg + hardener 0,9kg
    • 7,25kg - resin 5kg + hardener 2,25kg
    • 14,5kg - resin 10kg + hardener 4,5kg
    • 29kg - resin 20kg + hardener 9kg ( 2 x 14,5 kg kmpl)

    Use of EPOXY ONE UNIVERSAL epoxy resin

    • Weights: 100g resin / 45g hardener
    • Application time: approx. 45 min. at 20°C.
    • Start of curing (gelation) approx. 60 minutes (depending on temperature)
    • Final strength approx. 24-36 hours (depending on temperature).
    • Mix the components epoxy resin (component A) and hardener (component B) according to the weights indicated on the package. Epoxy One Universal is 100:45, i.e. 45 g of hardener must be added to 100 g of resin. Mix thoroughly for 3-5min until the epoxy is uniformly clear. 99% of failed projects are due to insufficient mixing.
    • Before pouring the mixed epoxy into the mould, you can allow the mixture to stand for a few minutes so that most of the bubbles will vent naturally. Carefully pour the mixed epoxy into the mould. If necessary, heat the surface with a torch to get rid of any bubbles that have formed on the surface. This can be repeated as necessary until gelation. Depending on the temperature of the workplace, the epoxy will gel within 45-60min. The epoxy solidifies within 12-24h and reaches its final strength within 24-36h. Epoxy One Universal epoxy has a maximum pouring height of 10mm.
    • For optimum results, the resin should only be mixed at room temperature.
      If the resin and hardener are too cold (below 5 °C), the hardening process may be slowed or even stopped.
    • The golden rule for epoxy cost is 1kg = 1mm = 1m2
    • Always wear personal protective equipment when working with epoxy.
    • If you're not sure which epoxy you need, contact us and we'll help you find out.

    Solidified epoxy has a strength class of 80 Shore D , DIN ISO7619-1.

    H302 Harmful if swallowed.
    H314 Causes severe skin burns and eye damage.
    H315 Causes skin irritation.
    H317 May cause allergic reactions to your skin.
    H319 Causes serious eye irritation.
    H411 Toxic to aquatic organisms with long-lasting effects.
    H412 Harmful to aquatic organisms with long-lasting effects.

      Shopping cart
      The shopping basket is emptyBack to shop