• FREE delivery from 100€

  • EPOXY ONE UV-värviline


    EPOXY ONE UV – üheosaline kristallselge UV epoksiidvaik, mittekollanev, väike mahukahanemine ja kiiresti kuivav.  Sobib parandustöödeks vooglaual, detailide liimimiseks, ehete valmistamiseks ja paljuks muuks.

    Toote valikus on 8 erinevat värvi: kollane, lilla, roheline, roosa, punane, sinine, valge ja must.

    Tootekood: - Kategooriad: , Sildid: , ,


    UV vaik on professionaalne ühekomponentne geelitaoline väga läbipaistev toonitud vaik.

    Hardens under UV light. For this you can use a UV lamp or sunny weather. UV resin has excellent mechanical resistance, very good impact strength and heat resistance. NB: Not suitable for large-scale casts (e.g. asbestosis, etc.).

    • Recommended casting height: maximum 2 cm (20 mm)
    • Heat resistance: about 93°C
    • One component, no hardener needed
    • Recommended UV light source distance: about 12-15 cm
    • Recommended UV lamp power: 9w-18w (UV 365nm - 405nm)
    • Cure time 2cm: (UV 9w-18w 120-150s, 36w 90-150s)
    • Excellent frost resistance up to -45°C

    H315 Causes skin irritation. H317 may cause allergic skin reactions. H319 Causes severe eye irritation. P101 If medical advice is required, keep the product packaging or label handy. P102 Keep out of the reach of children. P261 Avoid inhalation of vapours. P280 Wear protective gloves/goggles/face protection. P305+P351+P338 IN CASE OF INHALATION: Rinse gently with water for several minutes. Remove contact lenses if possible. Continue rinsing. P314 In case of discomfort, seek medical advice. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

      Shopping cart
      The shopping basket is emptyBack to shop