Description
How to use be art bubblemaster ?
After pouring the epoxy, let the bubbles rise to the surface. Spray the product once on the surface of the epoxy. After some time, spray again if necessary. Do not spray too much, a large amount of the product can also be affected by epoxy.
- Removes bubbles from the surface of epoxy.
- It is possible to create effects on pigments.
- To clean the molds.
- To clean tools.
- For the purification of liquid epoxy.
- Universal epoxy tool.
P243 Take precautions against static electricity. P261 Avoid inhalation of dust vapour/spray.
P271 should only be handled outdoors or in a well-ventilated area.
P303+P361+P353 IN CASE OF SKIN CONTACT: immediately take off any contaminated clothing. Rinse the skin with water/rinse in the shower.
P304+P340 FOR INHALATION: Treat the victim to fresh air and place it in a comfortable resting position that allows you to breathe easily.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses when used and if they are easy to remove. Rinse once more. The product contains Isopropanol
Store out of the reach of children!
Do not deposit in direct sun!
Use only outdoors or in rooms with good ventilation!
